Are you having issues with your Nine Dragons yoyo? Is the bearing not spinning properly or is your yoyo making unusually loud noises? In most cases, the problem is caused by a dirty bearing that simply needs to be cleaned.
The Nine Dragons is a little different from regular yoyos because it uses three bearings – one main bearing and two side bearings inside the special Dragon Caps.
How to Identify Which Bearing Needs Cleaning?
If the yoyo starts returning with a tug, the main bearing is most likely dirty (the bearing where the string is attached).
If the side Dragon Caps stop spinning freely, try spinning them by hand. They should normally spin for around 10 seconds or longer. If they stop much sooner, one of the side bearings will probably need cleaning.
Sometimes the yoyo can also start making noticeably louder sounds. Cleaning the bearings can help in this case as well. Keep in mind that the Nine Dragons is naturally louder than regular yoyos due to its multiple bearing design, and a slight humming sound is completely normal.
How to Disassemble the Nine Dragons
Accessing the main bearing is quite simple. Place your palms on both metal parts of the yoyo and twist them in opposite directions. The thread will loosen, the yoyo will unscrew, and you will gain access to the main bearing.
If you need to reach the side bearings, you will also need to remove the plastic Dragon Caps. If they do not come off easily, you can use the axle to help remove them. A detailed explanation can be found in the video above.
How to Clean a Yoyo Bearing?
Follow these steps when cleaning the bearing:
Pour a small amount of lighter fluid or cleaning solvent (for example Zippo lighter fluid) into a small glass container.
Using tweezers, place the bearing into the liquid.
Spin the bearing several times to help loosen any dirt or debris.
Remove the bearing and let it dry on a paper towel.
Once dry, check that the bearing spins smoothly and freely.
If the bearing still does not spin correctly, remove the side bearing shields and repeat the cleaning process.
Your Nine Dragons Should Work Properly Again
Once the problematic bearing has been cleaned, reassemble your yoyo and test it. In most cases, this will restore the proper function of your Nine Dragons.
You can find a detailed tutorial in the video above, where Ann Bubak shows the entire process step by step. If you still have any questions, let us know and we will be happy to help. 🙂
We need your consent to use individual cookies so that, among other things, we can show you information related to your interests. You can give your consent by clicking “Accept”.
Discussion